logo

Product

Contact Us

Dalian Ligong Safety Equipment Co.,Ltd

Conventional Simple Domed Bursting Disc

CONVENTIONAL SIMPLE DOMED RUPTURE DISK ( LP TYPE) The burst pressure of Conventional Simple Domed Rupture Disk is determined by the tensile strength of the material employed. System pressure is subjected to the concave side of rupture disk on normal operating condition. When excessive pressure...

Chat Now

Product Details

CONVENTIONAL SIMPLE DOMED RUPTURE DISK ( LP TYPE)

The burst pressure of Conventional Simple Domed Rupture Disk is determined by the tensile strength of the material employed. System pressure is subjected to the concave side of rupture disk on normal operating condition. When excessive pressure occurs in the protected system, the dome begins to thin out and the disk bursts, providing a full relief opening.

Types

◆ Simple Rupture Disk (LP): withstand backpressure, non-backpressure or vacuum conditions with disk holders.

◆ Integrated Rupture Disk (LPZ): suitable for super-high pressure conditions.

◆ Welded Rupture Disk (LPH): suitable for high and super-high pressure conditions.

◆ Rupture Disk with Vacuum Support (LPT): suitable for vacuum or backpressure conditions.

image001.png  image003.png

Features 

◆ Broad range of application, and can choose the corresponding assembly according to different burst pressure and vent area. 

◆ Manufacturing ranges depend much on material strength. 

◆ Designed for gas, liquid service

◆ High temperature and pressure.

◆ Maximum operating pressure equal to or less than 70% of the minimum burst pressure, and not suitable for pressure pulsating conditions.

◆ Fragments on burst.

◆ Short service life and easily cause creep deformation and fatigue damage

◆ Obvious temperature effect may cause burst pressure fluctuation. The temperature goes up while burst pressure declines. 

Specifications 

TYPE

LP

BURST DIRECTION

image006.jpg

LOAD TYPE

TENSION

SIZE (mm)

5~900

BURST PRESSURE RANGES (MPa)

0.01~500

BACKPRESSURE (VACUUM) SUPPORT

AVAILABLE

DISK HOLDER TYPE

LJ、LJB

DYNAMIC RESPOND (sec)

>1/1000

INFLAMMABLE MEDIA USAGE

NOT SUITABLE

CYCLE LIFE

>12,000 [OPERATING RATIOS≤70%]

CYCLE RESISTANCE CAPABILITY

ORDINARY

SPARK POSSIBILITY

POSSIBLE

SAFETY VALVE ISOLATION

NOT AVAILABLE

NOTICE

VACUUM CONDITION SHOULD BE SPECIFIED


Previous:Conventional Scored Domed Bursting Disc Next:No Information
Related Products

Inquiry

Home
About us
Products
Contact Us
Feedback
Products
Bursting Disc Safety Device
Bursting Disc Holder
Safety Valve
Warning Device
News
Basic Definition Of Safety Valve
Anti-arch Belt Type Blasting Piece
Classification Of Bursting Tablets
The Suitable Place Of The...
Contact information

No. 26,Liaohe East Road,Double D Port,Economic and Technological Zone,Dalian,China

Tel: +86-411-66778100

info@duta.com.cn

Copyright © Dalian Ligong Safety Equipment Co.,Ltd All Rights Reserved.